With the help of a refrigerant, your unit performs a complicated sort of heat transmission. When your refrigerant level falls below a certain level, heat transmission ceases, and the machine, while still working and blowing air, will no longer supply cold air. It indicates that the air conditioner needs to be recharged, or it may even need an AC installation in Reading, PA.
How to start?
Find out what type of refrigerant your system utilizes. There are various sorts, and recharging with the incorrect one could result in much more severe issues than people not having a charged AC unit. While a commercial Freon kit can be used to obtain coolant and recharge the unit, the rest of the air conditioner’s working components can be dangerous and daunting to an unskilled person. It’s a good idea to consult an air conditioning repair in Reading if you’re not sure how to handle a project of this kind.
Five steps to recharging
- Step 1: Inspect the unit
Identify the compressor of your air conditioner using the instructions that came with it. It will resemble a metal cylinder with two lines extending from it.
TIP: Before adding the coolant, verify the remaining components to ensure clean and good operating order.
- Step 2: Plug service valve
Inside your Freon kit, look for the service valve. It’ll be the kit’s massive connecting valve, which you can find among the other items. In the air conditioner unit, connect the service valve to a compression line (one of the lines you found adjacent to the compressor before). Attach the service valve according to the directions in the Freon kit.
There are two explanations for this: 1) something besides the refrigerant may be affecting the unit’s effectiveness, and 2) if a new refrigerant is added and the unit is turned on whereas another element isn’t working correctly, all kinds of general damage could occur.
- Step 3: Plug tap valve
The Freon package comes with a tiny valve connector.
Homeowners must connect the tap valve to the compressor’s remaining compressor line. You can find fittings on the compressor of your air conditioner.
- Step 4: Input Freon
To add Freon to the lines, connect the Freon container to the two valves you just placed. To seal the canister between the two valves, follow the directions in your Freon kit.
- Step 5: Change Freon
You must now allow the Freon to flow into your house AC unit after adding new coolant. Start turning on the machine and adjust the volume to the highest altitude. It will push Freon into your ac unit, thereby recharging it in the process.
Once the air conditioner has absorbed all of the Freon, switch it off. Remove the Freon container as well as the two valves you put in. We can get you amazing deals on AC repair in Reading, PA, and help you save money. If you’re looking for the best HVAC services in town, schedule our services by calling us at 570-754-8000.