The air conditioner tends to be significantly affected by sudden changes in the temperature and climatic conditions. In most cases, the unit will decide to shut itself down completely when the input power levels are drastically higher than usual or if the power is turned off for a long time. This is because the circuit breaker trips. It would lead to many people believing that the unit requires repairs and will hire HVAC repair in Reading, PA.

Steps to Turn on Circuit Breaker

The circuit breaker is the safety switch present in each AC unit. These switches prevent the AC from further damage in stressful conditions by switching off the unit completely. It can only be turned on when the switch is manually turned on. According to technicians providing air conditioning service in Reading, one can use this guide to find and turn on the circuit breaker –

1. Turn Off Thermostat

When the AC has shut off due to a tripped circuit breaker, the first thing is to set the thermostat off. The thermostat usually bears the responsibility of telling the AC when to cool or how low the room temperature has to be. Therefore, when it is shut off, it will not be able to do so.

2. Find Breaker Box

The next thing one would have to do is to find the breaker box. This is, essentially, the region where the circuit breaker for all the major appliances of the house is present in most houses. This breaker box is great in color and metallic. It is present in garages, laundry rooms, closets, or in basements too. It can also be present on the outside of the house.

After opening the breaker box, one will have to detect which circuit switches are present in the “tripped” conditioner. It is also known as the neutral condition. That is, the orientation of the switch is different from the other switches. To turn the switch on, the orientation of the switch must be turned to the left. It is the opposite to turn it off.

3. 30-Minute Waiting Period

After finding the breaker box and turning it on, one would have to wait for a certain amount of time before turning on the switch. The reason is that the breaker box only contains the external breakers. However, there are internal breakers as well. During this waiting period of 30 minutes, the internal breakers will reset as well. The resetting of the internal breakers is also another reason why the thermostat should be turned off. If this resetting is not occurring, it may be time to call HVAC repair in Reading, PA.

4. Recalibrate Thermostat

Finally, after the 30-minute wait is over, one can return to the thermostat and recalibrate it to the desired temperature. The recommended temperature is to be set at 5 degrees lower than the external temperature. This will reduce the chances of the AC tripping again.

Therefore, a homeowner can reset the circuit breaker, both externally and internally, on their own. To attain affordable but quality air conditioning service in Reading, contact us at Admore Comfort by calling (570)-754-8000. One can also send a mail to [email protected].